The SP Compressor has superb tone quality featuring a wide variety of compressor tones from vintage, to subtle, to modern and more.
based on the highly revered
Easy to operate and plays well with other pedals (distortion, reverb wah etc).
Run it with the Xotic Voltage Doubler at 15v or 18v for even more headroom!
don’t leave out the grit and growl,add extra dimension to your crunch or lead tone.
A compressor pedal is traditionally used with clean tones but it plays nicely with overdrive and distortion pedals for nice crunchy lead tones.
True bypass for eliminating any signal interference when switched off. Can be used with AC adaptor (optional) or 9V Battery.BUY NOW
need more headroom?you got it!
The Xotic “Voltage Doubler” is a step-up converter that takes 9 volts DC and boosts it to an output voltage of 15 or 18 VDC (max current draw 80mA).
Why do you need a voltage doubler? Higher voltage levels result in more headroom. When you boost the voltage your find your Xotic pedals will get much more dynamic, more headroom, top end and brightness, less compressed sound.GET THE VOLTAGE DOUBLER
Small pedal, huge tone
With it's compact size, the SP Compressor is a perfect fit for any pedalboard. It may be small, but this compressor packs a huge punch when it comes to tone shaping options.
Highly Configurable, Yet So Simple
Open the back cover and you'll find the internal dip switches for even more tone shaping capabilities.
Bypass the pedal with true bypass switching when disengaged.
Your always on pedal
Many players find that they will leave the SP Compressor on at all times.
Discrete FET Design, Road Worthy Enclosure
Compact design with a huge sound. Perfect for musicians on the go.
More Power Under the Hood
Toggle the sustain/compression switch to adjust the amount of desired compression.
The SP Compressor can be set forHigh, Medium or Low Compression
|Dimensions (W/D/H):||3.5" x 1.5" x 1.5" (89mm X 38mm X 38mm)|
|Weight:||0.57 lbs. (260g)|
|Bypass:||True Bypass Switching|
|Battery Type:||9VDC (006P) x 1|
|AC Adapter (Optional):||9VDC-18VDC, Negative Tips (Regulated recommended)|
|Input Impedance:||1M ohm|
|Output Impedance:||10k ohm|
|Nominal Input Signal Level:||-20dB (100mVrms)|